WHAT CAN OUR CHAFF CUTTER MACHINE DO?

Chaff Cutter is a silage crushing device driven by a motor or diesel used on the farm or mounted on tractors in the field.

FC series chaff cutter machine for chopping crop stalks to make the material of silage, animal feed, biomass fuel, papermaking, and wood chips for growing fungi.

The materials can be alfalfa, oats, wheat, cotton stalk, bark, straw, barley,  hay, corn, corn stalk, squeezed sugar cane, Napier grass, and various plant straws below 50mm in diameter can be chopped (including cotton stalks and branches)

Chop the silage at the correct length.

Silage should be fine enough so that when it is packed, oxygen can be quickly eliminated for a good fermentation, but long enough for cud-chewing by cows. Alfalfa haylage should be 3/16 of an inch in length, unprocessed corn silage should be approximately 1/2 inch, and processed corn silage should be 3/4 inch.

FC Series chaff cutter is ideal farm equipment for farmers, small dairies, and livestock owners.

It cuts green/dry grass, hay, and maize stalk for preparing Silage, which is used as animal fodder.

It can cut fodder in different sizes (from 10~35mm)

As an additional option, a universal P.T.O drive would allow the equipment to be fitted to a tractor, making the fodder cutting machine mobile.

 

OUR FC SERIES CHAFF CUTTER FEATURES

• Entire steel structure, portable, small & light.
• Special device to ensure safety in the operation.
• The grass roller adopts a cross shaft, with the advantage of compact structure, running agility, and simple installation.
• Multi-choice driven; motor, diesel engine, and tractor. It is especially suited for electric scarce areas.
• The blade adopts high-quality steel, through special technology processing, it is super wear-resistant and fixed by high strength bolt to ensure safety when running.
• High performance-cost ratio.

 

WORKING PRINCIPLE OF CHAFF CUTTER MACHINE

Chaff cutter machines’ basic structure: it is made up of a feeding part, cutting and throwing part, transmitting part, walking part, and safety device, so it is reasonably structured and easy to be moved with autonomous feeding. It is safe and reliable.
a. The feeding structure comprises the feeding platform, transmitting chains, feeding roller, fixed cutter blade, and fixed cutter holder.
b. The cutting and throwing structures are mainly made up of a motion knife, knife frames, and locking bolts.
c. The transmission structure consists of a triangle belt, transmitting axle, gears, universal joints, and chains.
d. A walking structure is made up of ground wheels or walking rubber wheels and a traction frame.
e. defensive device contains several safety hoods.
Chaff cutter machine working principle: It is powered by a motor (single-cylinder diesel engine, or four-wheel tractor). The power is transmitted to the main shaft, and the gear at the other end of the main shaft transmits the speed-regulated power to the grass pressing roller through the gearbox, universal joint, etc. When the material to be processed enters between the upper and lower grass pressing rollers, it is clamped by the grass pressing roller. It is held and sent to the guillotine cutting mechanism at a certain speed. Finally chopped corn stalk is thrown out of the chaff cutters.

 

 

CHAFF CUTTER MACHINE TECHNICAL DATA

Model	FC-2.5A	FC-4C	FC-6A	FC-9A
Capacity (t/h)	1-2.5	2-4	4-6	6-9
Applied Motor (kW)	4	5.5	7.5	15
Applied Diesel Engines (hp)	≥8	≥12	≥15	≥28
Size (mm)	1150×1230 ×1695	1020×1520 ×2756	1968×2147 ×2756	2620×2140 ×3390
Weight (kg)	165	310	450	910
Chain Conveyor	√	√	√	√
Feed Rollers	√	√	√	√
Tractor Linkage Device	∞	×	×	×
Diesel Engine Mounting	∞	∞	∞	∞
Pneumatic Tire	×	×	∞	∞
√: standard device       ∞: optional device      ×: unavailable device

 

CHOOSING A CORRECT CHAFF CUTTER MACHINE

There are many fodder chopper machine brands on the market. You need to compare the following aspects when choosing a silage chopper:

High-quality Blades

The blade is made of high-quality steel and refined by a special process, each set passes the dynamic balance test.

 

Gear Box

The user can alter the length of the material with the gearbox device according to their demands. The structure of the transmission box can save labor and reduce noise. Also change the disadvantages of replacing the gear when adjusting the cutting length.

 

Gear lever

This shift lever adjusts the length of the silage, and the chopping length is approximately 1.5cm or 3.5cm.

 

Feeding Roller

Two kinds of feeding straw press roller to the selection, corrugate grass roller carding and pushing forage grass, and transverse roller to compact the forage.

Solid cast grass roller, tough and durable, wear-resistant, long service life

 

CHAFF CUTTER MACHINE FC-2.5 TEST RUNNING

 

DELIVERY CHAFF CUTTER MACHINE

Before sending the fodder chopper machine, we will test and adjust, it so you can use it directly when you get it. Choose the cheapest and safest shipping company to save the cost and track the order until you get the goods.

1. We usually pack straw cutting machines in a standard wooden export case.
2. Transportation means by Air, by Sea or by Express and etc.
3. Shipment cost will depend on the destination, shipment way, and the weight of the goods.
4. You will get full feedback when our FC series silage cutting machinery is on the way

 

AGRICULTURAL FEED MACHINE WE HAVE

Our agriculture farm feed machines adopt a world-famous brand for the key electronic elements, pneumatic and hydraulic system to ensure high quality and reliable of the Agriculture machinery and feed machinery After the unremitting efforts of all staff, we won the approval and trust of the customers with the excellent performance, advanced technology, and good reputation.

Our Main Products: Chaff Cutter Machine, Grass Chopper Machine for Animals Feed, Fodder Kneading Chopper, Animals Feed Mixer Machine, Pellet Machine, Animals Feed Puffing Extruder, Wood Branch Crusher, Paddy & Wheat Harvesters are available for sale.

 

 

WHICH SERVICES YOU WILL RECEIVE

Pre-sale Service

1. Offering overall technology and business consultation services;

2. Proposing the most suitable scheme and equipment for our customer;

3. Designing and producing machines according to the special demands of clients;

After-sales Service

1. Carefully checking the machine in every working procedure, quality comes first;

2. Assisting our clients with foundation construction of equipment;

3. Dispatching engineers to install and debug the equipment, training the first-line operators on-site;

4. Regularly visit clients to solve production problems and provide our technical support.

We have more than 15 years of experience, and support your best before and after-sales service. Quality is the first and top Pursuit of our company.